| Some Important International Standards |
|
ASTM A 109 |
Standard for properties of cold rolled steel strip (chemical composition) |
Standard for properties of cold rolled steel strip (hardness) |
Standard for properties of cold rolled steel strip (bend test) |
Thickness tolerances for cold rolled steel strip (under 23 15/16 inches in rolled width) |
Width tolerances of no. 2 edge (mill edge) for cold rolled steel strip (under 23 15 /16 inches in rolled width) |
Width tolerances of no. 3 edge (slit edge) for cold rolled steel strip (under 23 15 /16 inches in rolled width) |
Width tolerances of no. 1, 4, 5 and 6 edges rolled steel strip (under 23 15 /16 inches rolled width) |
Length tolerances for cold rolled steel strip (under 23 15/16 inches rolled width) |
Camber tolerances for cold steel strip (under 23 15?16 inches in rolled width) |
ASTM A366 |
Standard for properties of cold rolled steel sheets (chemical composition) |
A619 |
Standard for properties of cold rolled steel sheet (chemical composition) |
A620 |
Standard fort properties of cold rolled steel strip (chemical composition) |
|
ASTM A 568 |
Thickness tolerances for cold steel sheet (coils and cut sheet over 12 inches in width) |
Thickness tolerances for cold rolled steel sheet (coils and sheet over 2 to under 12 inches in width) |
Width tolerances for cold rolled steel sheet (coils and cut sheet over 12 inches in width, not resquared) |
Width tolerances for cold rolled steel sheet (cut sheet/ coils between 2-12 inches in width, 0.014-0.082 in thickness and over 12 inches in length, not resquared) |
Length tolerances for cold rolled s2teel sheet (cut sheet/ coils between 2-12 inches in width 0.014-0.082 in thickness and over 12 inches in length ,not resquared) |
Camber tolerances for cold rolled steel sheet (cut sheet over 12 inches in width not resquared) |
Camber tolerances for cold rolled steel sheet (over 2 to under 12 inches in width ,over 0.014yto under 0.08 inches in thickness.) |
Flatness tolerances for cold rolled steel sheet (cut sheet over 12 inches in width , stretcher leveler finish not specified) |
Flatness tolerances for cold rolled steel sheet (cut sheet, stretcher leveler specified) |
Out-of -square tolerances for cold rolled steel sheet over 12 inches in width , not resquared) |
|
|
|
DIN 1623 |
Unified under EN 10130 |
DIN 1624 |
DIN standard for properties of cold rolled steel sheet (carbon steel sheet and strip with narrow width of under 650 mm) |
DIN 1541 |
Unified under EN 10130 |
DIN 1544 |
Thickness tolerance for cold rolled steel (under 650 mm in rolled width) |
Width tolerances for cold rolled steel strip (under 650 mm in rolled width) |
Length tolerances for cold rolled steel strip (under 650 mm in rolled width) |
Camber tolerances for cold rolled steel strip (under 650 mm in rolled width) |
BS EN 10130 |
Standard properties of cold rolled steel strip (chemical composition and mechanical properties |
Surface finished and surface roughness of cold rolled steel strip . |
|
BS EN 10131 |
Thickness tolerances for cold rolled steel and strip |
Thickness tolerances for cold rolled steel strip (high yield steel point) |
Width tolerances for cold rolled steel sheet and strip with wide width. |
Width tolerances for cold rolled strip (less than 650 mm in width) |
Length tolerances for cold rolled steel sheet |
Flatness tolerances for cold rolled steel sheet |
Flatness tolerances for cold rolled steel sheet (high yield point steel over 280 to less than 360N/mm2) |
ISO 3574 |
Chemical composition of cold rolled carbon steel sheet. |
Mechanical properties of cold rolled steel sheet |
Thickness tolerances for cold rolled steel sheet and strip |
Width tolerances for cold rolled steel and strip with width |
Length tolerances for cold rolled steel sheet |
Camber tolerances for cold rolled steel sheet and strip |
Flatness tolerances for cold rolled steel sheet |
|
|
JIS J 3125 |
Cold rolled superior atmospheric corrosion resistant steel |
JIS J 3133 |
Decaburised steel sheet and strip for porcelain enamelling |
JIS G 3135 |
Cold rolled high strength steel sheet with improved formability for automobiles structural uses |
|
JIS G 3141 |
Specification for cold rolled steel sheet and strip |
JIS G 3302 |
Specification for hot-dip-zinc coated steel sheet and coils |
JIS G 3316 |
Specification for shapes and dimension of corrugated sheet |
|
